IDENTIFICATION
GEEFLUX 505
CLASSIFICATION
AWS/SFA 5.17M : F7AO EM12K / F7AZ EM12K
AWS/SFA 5.17M : F48AZ EM14K / F48AO EM14K
AWS/SFA 5.17: F7PZ EL8
CHARACTERSITICS
• Agglomerated rutile alumina type flux.
• Recommended for single and multilayer welding of structural steels.
• The flux is resistant to porosity and slag detachability are excellent.
• The consumptions of flux is small and usually is about 1.1kg for 1.0kg of wire.
APPROVALS
| IOT |
| GEESAW EL8 X GEEFLUX 505 |
CHEMICAL COMPOSITION OF THE WIRE (AS PER AWS/SFA 5.17/ 5.17M)
| Wire | C | Mn | Si | S | P | Ti | Cu |
| EM12K | 0.05 - 0.15 | 0.80 - 1.25 | 0.10 - 0.35 | 0.030 max | 0.030 max | - | 0.35 max |
| EM14K | 0.06 - 0.19 | 0.90 - 1.40 | 0.35 - 0.75 | 0.025 max | 0.025 max | 0.03 - 0.17 | 0.35 max |
| EL8 | 0.10 max | 0.25 - 0.60 | 0.07 max | 0.030 max | 0.030 max | - | 0.35 max |
MECHANICAL PROPERTIES OF THE WELD METAL (RANGE)
| Wire | UTS (MPa) | YS (MPa ) | EL (%) (L=4D) | CVN Impact Value | |
| Temp | Joules | ||||
| EM14K | 480 - 600 | 400 - 520 | 22 - 30 | 27°C | 60 - 100 |
| 0°C | 50 - 90 | ||||
| EM12K | 480 - 600 | 400 - 520 | 22 - 30 | 27°C | 60 - 100 |
| 0°C | 50 - 90 | ||||
| EL8 | 480 min | 400 min | 22 min | 27°C | 60 min |
| 0°C | 50 min | ||||
CHARACTERISTIC CHEMICAL CONSTITUENTS
| SiO2 + TiO2 | Al2O3 + MnO | CaO + Mg | C9F2 |
| 30 | 31 | 24 | 15 |
INSTRUCTIONS : Dry the flux at 300°C –350°C for minimum 60 minutes before use.
CURRENT CONDITION : AC / DC (+)
PACKING PARAMETERS : 25.0 kg in a polythene coated gunny bag.
