TIG WELDING FILLER WIRE

IDENTIFICATION
Getig Ti-5, ERTi-5

CLASSIFICATION
AWS/SFA 5.16: ER Ti -5,
chemical alloy symbol: TiAl6V4B

DESCRIPTION
Getig Ti-5 is specially made TIG wire for welding of unalloyed grade of Titanium metal. The wire is used for fabrication of process equipments like pressure vessel, column, tanks, heat-exchanger etc. Care should be taken during welding specially cooling of the weld metal under protection of ultra-high pure grade of shielding gas such as argon.

CHEMICAL ANALYSIS (RANGE) %

TYPICAL APPLICATIONS

Welding of commercial grade of Titanium, process equipment, pressure vessel, columns, tanks, heat- exchangers, shafts blowers, fans. tubing, valves, fitting, pipes etc.

SPECIAL RECOMMENDATION

• The Titanium metal should be free of thick oxide, water, grease, dirt etc. therefore chemical cleaning is required prior to welding
• The filler metal (wire) should be chemically cleaned and should be free of oxides, dirt, moisture etc.
• The weld metal need to be shielded from the ambient air atmosphere by auxiliary inert gas shielding until it has cooled below 400°C.

SHIELDING GAS : Ultra high pure grade of Argon, 99.999% Pure.

PACKING PARAMETERS