IDENTIFICATION
GM 80SNi1, ER 80SNi1K
CLASSIFICATION
AWS/SFA 5.28: ER80S-Ni1K
DESCRIPTION
Mig wire containing about 1.0 percent Nickel is recommended for root run as well as for joint filling. The weld metal gives high impact values at subzero temperature up to minus 60°C. Deposited weld metal is of x-ray quality. Recommended single as well as multi-pass welding.
CHEMICAL ANALYSIS (RANGE) %
| C | Mn | Si | Cu | Mo | S | P | Ni | Cr | V |
| 0.12 | 1.25 | 0.40 - | 0.35 | 0.35 | 0.025 | 0.025 | 0.80 - | 0.15 | 0.05 |
| max | max | 0.8 | max | max | max | max | 1.1 | max | max |
MECHANICAL PROPERTIES (RANGE)
| UTS (MPa) | PS (MPa) | EL (%) (L=4D) | CVN Impact Value | |
| Temp | Joules | |||
| 550 min | 470 min | 24 - 30 | -50°C | 30 min |
TYPICAL APPLICATIONS
• C-Mn steels where good toughness is required at minus 50°C.
• ASTM A 333, A 334 Grade 6
• A 350 Grade LF2, LF5, APL 5LX Grade 65
• General and off-shore engineering , structural and weathering steels, pipe work and pressure vessels.
SHIELDING GAS : CO2 or 80% Argon + 20% CO2
WELDING CURRENT : DC (-)
PACKING PARAMETERS
| Size (mm) | Weight / Spool (kg) |
| 0.8 | 15 |
| 1 | 15 |
| 1.2 | 15 |
| 1.6 | 15 |