Griduct T300, E 11018G
AWS/SFA 5.5 : E 11018G IS: E76BM329Fe
DIN: 8529-81~EY 6977 Mn2NiMoBH5 BS : 2493-85 2NiMOB
An extruded heavy coated Hydrogen controlled Low-alloy, High Tensile Electrode. The electrode works in all position gives very little spatter with an easily removable slag leaving a bead of nice appearance. The deposition efficiency is approx. 110%.
WELD METAL ANALYSIS (RANGE) %
MECHANICAL PROPERTIES (RANGE)
• Penstock, earth moving equipments and heavy steel Fabrications made from high tensile steel.
• For welding USS -T1 steel, WEL -TEN 80 steels, SA 517 grade F and their equivalents. Specially recommended for welding ASTM AS17 Gr F Q&T steel.
• Excellent for welding fully killed fine grained steels and W36HI Tensile Steel.
Use short arc length. Weaving of electrodes, if necessary should be done at slow speed and keeping a short arc. The electrodes should be used in perfectly dry condition. The electrodes should be dried at 400°C for 1 hour to obtain better result. Maintain interpass temperature below 120°C.
DIFFUSIBLE HYDROGEN CONTENT : 4.0 ml / 100 g. deposited metal (maximum)
WELDING POSITION :